High Compression/High Altitude - GY6 172cc (61mm) Scooter Performance Kit and Kaboodle

This is our High Compression/High Altitude kit. This kit will come with a domed style piston. This raises the compression ratio. This is a must if you ride in an area that is 3000 feet or more above sea level. The higher you go in elevation, the more your compression is lowered. You can install this kit in a sea level engine no problem. Just know you will need a high torque starter and performance starter clutch. The high altitude people won’t need those parts.

This has all the performance you need put into one kit! We have spent years testing and selling other kits. Some things we liked and others we didn't. We pieced this kit together with the best of the best materials (rings, gaskets, springs, and metals). This high compression 171cc kit (or as some call it 172cc) requires no case boring unlike some others on the market, and is also a "drop in" kit. It is the largest big bore kit you can do on the GY6 A motor (Chinese GY6 QMJ157). Like they say, “there is no replacement for displacement“.

Another cool thing is, the piston ring end gaps have been set and installed into the cylinder. This eliminates a ton of work and liability on your end. Easy peezy! For the money, this kit flat out rocks! We even have a install video!

**PISTON RING GAPS HAVE BEEN MEASURED AND PRE-INSTALLED ONTO THE PISTON, THEN INSTALLED INTO THE CYLINDER. DO NOT REMOVE THE PISTON FROM THE CYLINDER, THIS CAN RESULT IN BENDING THE RINGS DURING RE-INSTALLATION, AND REQUIRE YOU TO PURCHASE NEW RINGS. THIS IS A LUXURY SERVICE YOU WILL NOT GET IN OTHER KITS. SLIDE THE PISTON DOWN JUST FAR ENOUGH TO INSTALL THE PISTON PIN, WITHOUT EXPOSING THE RINGS**

This will fit most QMJ157. Please refer to the video in this listing for fitment, because there are some engines this will not work on, and we explain why!

ATTENTION BUGGY OWNERS: We have not yet perfected all the GY6 engine models for buggies to know if this kit will fit or not. Buy at your own risk!

This kit comes with:

- Domed Piston Cylinder Kit
- Big Valve Head
- ProBld Performance Camshaft (low end to mid range power)
- 28mm Drop In PWK Slide Style Carburetor (assembled, w/ intake manifold)
- Carburetor Cable
- UNI Pod Air Filter
- 20 Piece Jet Kit

All you have to do is decide if you want a forged piston or cast piston in your kit. You may find other kits for half the price, online but note, they are made in China. This kit is made in Taiwan and there is a HUGE difference in quality.

NOTE: THIS KIT IS FOR THE GY6A ENGINE WITH 54MM STUD SPACING

ADD A WIDE BAND O2 SENSOR KIT TO MAKE TUNING A BREEZE CLICK HERE!

GY6 Torque Settings CLICK HERE!

**THERE ARE NO RETURNS ON PERFORMANCE PARTS**

FREE INSTALL VIDEO BELOW!