Honda Ruckus & Maddog Buttons (100% Plug and Play!)

If you’ve deleted the right-hand switch housing (kill / start) for a cleaner bar setup, you still need a reliable way to start—and optionally kill—the bike. This kit moves those functions to robust 19 mm billet push buttons that mount in the factory battery box openings. Wiring is truly plug-and-play: disconnect the original control, connect this harness, and you’re done. No soldering, no cutting, no hunting down pinouts.

We also offer a dual-button option that replaces the factory high-beam and indicator light locations on the battery box for a stealth, symmetrical look. All configurations are built around the same simple install path and OE-style connectors wherever applicable.

For Maddog: If you’ve added a Ruckus battery box, these buttons fit the factory Ruckus holes. Depending on where you mount the buttons, ground wires may need to be lengthened. Wiring logic is the same as a Ruckus—the mounting location is up to you.

NOTE: The Ruckshop brand PSP harness has some super off the wall wiring and will not work with these buttons.

THESE WILL WORK ON BOTH GY6 HARNESSES AND STOCK RUCKUS HARNESSES. IF YOU HAVE A HONDA RUCKUS, THESE BUTTONS WILL WORK.

 IF YOU DON'T WANT TO LOOSE YOUR INDICATORS WE HAVE OUR NEW "007 SECRET INDICATOR BUTTONS" CLICK HERE!

What’s Included

• Pre-wired start/kill button assembly (per configuration selected)
• Plug-and-play harness pigtail
• 19 mm (3/4") mounting hardware for battery-box fitment

Finish/options are determined by the variant you pick at purchase.

• Fits Honda Ruckus (GET) and GY6 harness conversions using standard wiring.
• Does not work with Ruckshop PSP harness due to non-standard wiring (see note above).
• Maddog: if using a Ruckus battery box, holes are direct fit; lengthen ground wires as needed.
• Buttons are 19 mm (3/4")—they drop into the factory battery-box openings.

• Clean bar area with the function you need.
• Fast install—typically a few minutes.
• Factory-style look when mounted in the battery box.

Q: Is any cutting or splicing required?
A: No—this is a plug-and-play setup when used with standard Ruckus/GY6 wiring.

Q: Will this work with a GY6 swap?
A: Yes—compatible with typical GY6 harnesses; PSP harness is the known exception.

Q: What size holes do I need in the battery box?
A: 19 mm (3/4")—the factory Ruckus battery-box holes are already the correct size.

Still have questions? Open our live chat — we’re here to help.