GY6 150cc Long Case Engine A BLOCK

If you are looking to convert your GY6 Honda Ruckus to 150cc, it all starts here. This motor can also be used as a replacement to your stock 150cc Chinese scooter or go-kart engine. This engine is equipped with a 11 pole stator and performance brake shoes. This is a 54mm stud spacing A Block. To put this motor into perspective, the stock 50cc Honda Ruckus (GET motor) puts out roughly 2.5hp. This GY6 engine puts out 8hp; almost three times the power! Although this engine comes with a light coat of shipping oil, you will need to drain and fill with fresh oil.

• This engine is shipped somewhat dry. DO NOT RUN THE ENGINE WITHOUT ADDING FRESH OIL AND REMOVING THE SHIPPING OIL.
  
  
• Check the oil level after letting the engine idle for a few minutes, and add additional oil if needed.

ENGINE STAND NOT INCLUDED

IMPORTANT NOTE: This engine will not fit into any scooter that originally had a 49 cc GY6 engine.