720.341.2326

DIY Rolling Wrench Fuel injection kit 49cc-350cc

  • Sale
  • $419.00


Here is our Rolling Wrench DIY (do it your self) fuel injection kit. This kit is a stand alone EFI kit. All of the wires will be labeled for a simple install. Wires will possibly need to be shortened or lengthened. The ECU will not come set up or tuned. You are in charge of all settings(fuel map/tuning and timing). If you don’t know much about fuel injection systems, do not purchase this kit. You will pull your hair out, unless you are very patient and are willing to learn!  If you are looking to install a turbo charger and you are super familiar with fuel injection systems this kit Rocks! Here is a list of everything included:
1.ECU & harness ( may need to lengthen or shorten wires)
2. Fuel Pump & integrated fuel pressure regulator 
3.Injector
4.Data cable
5.Fuel line
6.Hose clamps
7.Throttle body of your choice 
8.TPS, MAT, & MAP sensor (if you are running a turbo we will send a different map sensor)
9.CDI (adjustable timing and rev limit within the software)
10.Oxygen sensor weld in type (4 wire narrow band)
11.Cable narp
12.Tuning software (after purchase you will receive a download link)
NOTE: this fuel injection system draws 1.5-2.0 amps while running. Be sure you have the charging system to support this. If you own a GY6 you will need a 11 pole stator.
PLEASE NOTE: THIS KIT IS ONLY FOR SINGLE CYLINDER ENGINES.
Click the software picture for our FREE software download
---------- PLEASE ADD YOUR EXACT MOTOR SIZE, AND IF YOU ARE GOING TO RUN A TURBO CHARGER  IN THE NOTES AT CHECK OUT.-----------
Expect 2 weeks or so before you receive your kit after payment.